ALPINESTARS 3 Stickers

ALPINESTARS logo stickers
Delivered under transfer

Glossy finish by default

The default dimensions are shown in the options above.

To obtain a custom cut:

Please choose the standard size and indicate the precise dimensions in the dedicated box.

Example: I want a sticker in 18cm - 18 being between 15 and 25cm - so I choose 25cm

For further customization , please do not hesitate to contact us via the contact form before ordering.

Before starting, make sure that the surfaces are smooth and perfectly degreased (even if the vehicle is new or recently repainted)

How to prepare the body?

• A good cleaning with water and a NON-shiny shampoo is necessary.

WARNING: Do not use WD40, white spirit, shine shampoo, polish, Vulcanet wipes... and other products with silicone.

Read the 3 mistakes to avoid...

THE STEPS:

1. Clean and scrub
2. Rinse with clean water
3. Don't forget the corners and bodywork returns. Some stickers can go that far.
4. Dry thoroughly

• It is important that the surface is not at too low a temperature; in winter, remember to heat the surface a little during installation using a heat gun.

• If the stickers are not applied immediately, store them in a dry place away from sunlight and heat.

• After application, avoid contact with cold and humidity for the first few days to optimize hold.

These stickers are made-to-order products.

Therefore, returns, exchanges and refunds are not possible.

It is then important to check your order carefully.