KIT stickers HONDA CBR 1000rr 2010

X2 stickers HONDA 25 x 3cm
X2 stickers CBR 18 x 2cm
X2 stickers FIREBLADE 12 x 1.9cm
X2 stickers 1000rr 11.5 x 1.1cm
X2 stickers logo HONDA 12 x 9.5cm


Livré sous transfert

Finition brillante par défaut.

The dimensions for each sticker are specified in the description above.

Colors are to be chosen from the options above.

For further customization , please do not hesitate to contact us via the contact form before ordering.

Before starting, make sure that the surfaces are smooth and perfectly degreased (even if the vehicle is new or recently repainted)

How to prepare the body?

• A good cleaning with water and a NON-shiny shampoo is necessary.

WARNING: Do not use WD40, white spirit, shine shampoo, polish, Vulcanet wipes... and other products with silicone.

Read the 3 mistakes to avoid...

THE STEPS:

1. Clean and scrub
2. Rinse with clean water
3. Don't forget the fairing corners and returns. Some stickers can go that far.
4. Dry thoroughly

• It is important that the surface is not at too low a temperature; in winter, remember to heat the surface a little during installation using a heat gun.

• If the stickers are not applied immediately, store them in a dry place away from sunlight and heat.

• After application, avoid contact with cold and humidity for the first few days to optimize hold.

Motorcycle stickers are products made to order.

Therefore, returns, exchanges and refunds are not possible.

It is then important to check your order carefully and follow our application advice.