CHALLENGER REAR LIGHT STRIP KIT

X1 stickers for the central part
X2 stickers for the 2 right and left parts

Single color.


The dimension will be adapted to the model of your vehicle but with an additional margin of a few mm between the bodywork elements for an easy and perfect adaptation.

Matte or glossy finish to choose from.

Delivered under transfer.

The size will correspond to the vehicle model you indicated above.

The colors are to be chosen according to the model presented, in the options above.

For further customization , please do not hesitate to contact us via the contact form before ordering.

Before starting, make sure that the surfaces are smooth and perfectly degreased (even if the vehicle is new or recently repainted)

How to prepare the body?

• A good cleaning with water and a NON-shiny shampoo is necessary.

WARNING: Do not use WD40, white spirit, shine shampoo, polish, Vulcanet wipes... and other products with silicone.

Read the 3 mistakes to avoid...

THE STEPS:

1. Clean and scrub
2. Rinse with clean water
3. Don't forget the corners and bodywork returns. Some stickers can go that far.
4. Dry thoroughly

• It is important that the surface is not at too low a temperature; in winter, remember to heat the surface a little during installation using a heat gun.

• If the stickers are not applied immediately, store them in a dry place away from sunlight and heat.

• After application, avoid contact with cold and humidity for the first few days to optimize hold.

We put up a similar decoration.

Click below to see the technique used.

APPLICATION TUTORIAL

Car decorations are products made to order.

Therefore, returns, exchanges and refunds are not possible.

It is therefore important to carefully check your order and follow the application instructions for successful installation.